Digi Sm500 Scale User Manual -

Adjust the scale's feet until the air bubble in the level indicator is centered.

Verify that your local voltage matches the scale's power specifications listed on the rating plate. Connect the power cord to a grounded electrical outlet.

Place the food item inside the empty container on the scale. Enter the item PLU code and press . Press [PRINT] to issue a label showing net weight only. 6. Troubleshooting and Error Codes

Place the scale on a flat, stable, and vibration-free surface. Check the spirit level bubble indicator. digi sm500 scale user manual

Ensure you keep the thermal printhead clean. Use a soft cloth lightly dampened with isopropyl alcohol to remove adhesive residue, which will prolong the life of the printhead and guarantee crisp barcodes. Troubleshooting Common Issues

A: Yes, the scale is equipped with an Ethernet port, RS232C, and PS2 ports, making it easy to connect to a network or a computer for data transfer and management. It can be integrated into a larger retail system.

Assign the standard barcode prefix code (usually 01 or 02 ). Press the PLU key to save the record. Press MODE to exit back to normal weighing mode ( R MODE ). 5. Daily Operation Instructions Standard Weighed Transaction Ensure the scale reads 0.000 . Press ZERO if necessary. Place the item on the weighing platter. Adjust the scale's feet until the air bubble

Ensure the scale pan is empty and press the key. Move the scale away from fans or heavy machinery. Communication errors with PC Network or cable issues

Gently wipe the dark strip on the underside of the print head block.

The DIGI SM-500 series combines precise weighing technology with a robust thermal label printer and a user-friendly interface. Place the food item inside the empty container on the scale

Wait for the stable indicator icon to light up on the screen. Press the key to issue the itemized thermal label. Pre-Pack Packaging (Using Tare) Place the empty container or tray onto the scale platter. Press the [TARE] key to clear its weight from the display.

Lift the stainless steel tray. Wipe away loose debris to prevent weighing interference.

Thread the backing paper through the peel-off bar mechanisms and wrap it around the rewind take-up spool.