Print, video, sounds

Lost Shrunk Giantess Horror High Quality <CONFIRMED>

What separates low-effort content from the "high quality" demanded by discerning fans? It isn't just 4K resolution. It is direction .

Shadows Under the Sole: The Psychological and Cinematic Power of Shrunk Giantess Horror

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Use "God rays" and massive shadows. The giantess should often be backlit or partially obscured by the scale of the room, appearing as a looming, monochromatic silhouette. lost shrunk giantess horror high quality

Survival is possible, but recovery is not. Even if the protagonist regrows, they will forever flinch at footsteps, refuse to enter women’s shoe stores, and see every home as a potential killing field.

A story where the giantess is a kind, lonely woman who finds the tiny protagonist and keeps him in a jar “for his safety.” She talks to him. She tries to feed him crumbs. She doesn’t understand why he screams when she peers in, her eye filling the glass like a moon. The horror is her unintentional cruelty . She is a well-meaning god. You are her pet. There is no escape, only the slow realization that she will forget to change the air holes.

Give concrete measurements. “The fallen bobby pin was taller than me. Its ridged grip was a ladder — if I wanted to climb into its rusted teeth.” What separates low-effort content from the "high quality"

The booming vibration of a voice that cracks the air, the eclipsing shadow of a hand, and the realization that your entire world exists within the footprint of another. Lost in the Uncanny Valley

The horror is not being crushed. The horror is the possibility of being seen, and the absolute certainty that she would not care.

Giantesses, towering over the landscape like skyscrapers, are the embodiment of terror in this world. Their enormous size, strength, and unpredictability make them formidable creatures that inspire fear and dread. The sound of their footsteps can be heard for miles, causing the ground to shake and tremble beneath the tiny protagonist's feet. A single misstep can result in a crushing blow, ending the protagonist's journey abruptly. Shadows Under the Sole: The Psychological and Cinematic

The "lost shrunk giantess" genre, when executed with high quality, is not a joke or a deviance. It is a meditation on the modern condition. We are all, in some way, the shrunken protagonist. We live in a world of systems (economic, political, ecological) so vast that we cannot perceive their totality. The "giantess" is the algorithm. The landlord. The supply chain. She means us no specific harm, but her indifference is lethal.

For a long time, searching for "lost shrunk giantess horror" led to a disappointing wilderness of low-resolution CGI, wooden acting, and narratives that abandoned horror for wish-fulfillment. The dreaded "Vore" or "Crush" fetish often hijacks the tension, turning a survival scenario into a gratuitous spectacle.

Imagine being shrunk down to a tiny size, only to find yourself in a world where giantesses roam free. The thrill of adventure quickly turns into a nightmare as you navigate through a terrifying landscape of enormous feet, crushing steps, and deafening screams. Welcome to the world of lost shrunk giantess horror, where the boundaries of reality are pushed to the limit, and the fear of being trampled is ever-present.

One solution is to just install Linux on a computer, and then Apache and then mysql, then Perl, and then Movable Type. Thing is, I just fear needing a 4-year CS degree to be conversant in Linux.

The alternate is to use XAMPP, which is a Windows software stack that installs Apache, mysql, PHP, and Perl. After Installing Movable Type, it did not work. Using the mt-check.cgi file, which at least would run, it said there was no DBD::mysql module installed in the Perl program. I tried and tried to install DBD::mysql in XAMPP but if I used ppm (Perl package manager) it failed sisnce it could not find some dll. If I tried CPAN, another installer, it would go get the module, but could not compile since, ta da, there is no Perl compiler included in XAMPP.

Short answer is I installed Strawberry Perl, and then did a CPAN install DBD::mysql, and only after a Windows reboot did Movable Type see the module. The detailed misery is below. You can't install DBD::mysql in XAMPP since XAMPP does not appear to have a Perl compiler. I assume that people that don't have my problems are CS majors with 5 or 6 Perl compilers installed and all the Win .NET and all the other good programmer stuff.

I solved the problem by installing Strawberry Perl 5.20.2.1 (64bit). Yes, the 64 bit version. Since I have already wasted two days on this I figured to reach for the moon. At first there was no change in the mt-check.cgi file, still no DBD::mysql module was found. Then I went into the Strawberry Perl CPAN.bat file, and did an install DBD:mysql. It did a lot of chugging and seemed much happier than when I did this in the XAMPP CPAN.bat, where it failed since it could not find Makefile.PL. 		lost shrunk giantess horror high quality
move up a little to the right move down to the left
mt-check.cgi still reported no DBD:mysql module. Then I noticed that some of the Strawberry Perl files, like relocation.txt had 8.3 file-names with a tilde, and if figured that I was back in 1987. So I stopped all the services and rebooted the computer. When it came back, restarted the service in the XAMPP control panel and then mt-check.cgi reported the DBD:mysql module was there. It may have been there all the time, and I should have done the reboot after installing Strawberry Perl, so maybe the whole CPAN.bat was silly. I did choose Strawberry Perl since the DBD::mysql install docs say SP has it bundled.
I did have to change all the shebangs in the Movable Type .cgi files to point at the perl.exe in the Strawberry Perl sub-directory. Since I have heard Movable Type does not like spaces in path names, I did install Strawberry Perl in C:\Strawberry. Other voodoo I tried that was probably irrelevant was using file explorer to set all the cgi and pl files to open with perl.exe.
Movable Type 5.2 Pro on XAMPP 5.6.3:
  1. Download xampp-win32-5.6.3-0-VC11-installer.exe and install in C:/xampp (default I think)
  2. Download strawberry-perl-5.20.2.1-64bit.msi and install in C:/Strawberry (not default)
  3. If transferring a working Movable Type install from a web server, use FileZilla to sftp the mt (They use MT5.0 or some foolishness, I renamed it) and mtstatic directories from your server.
  4. Move the mt directory to C:\xampp\cgi-bin
  5. Move the mt-static directory to C:\xampp\htdocs
  6. Change all the shebangs in the .cgi files in mt to point at the Strawberry Perl perl.exe, for me that was #!C:/Strawberry/perl/bin/perl.exe -w
 lost shrunk giantess horror high quality
move up a little to the right move down to the left
  1. If not already, open the XAMPP control center (start>program files>XAMPP) and make sure both Apache and mysql are installed (left checkboxes) and started (those middle checkboxes).
  2. Type localhost in your browser address bar and enter. If you run no-script in Firefox, make sure to enable scripts for http://localhost at the bottom of the page. You may have to click on your language to get to the "real" XAMPP page.
  3. On the left panel, click Tools>phpMyAdmin
  4. Mess with that until you have figured out how to create a new database.
  5. Go back to http://localhost/xampp/ and click Welcome>security
  6. On that page click http://localhost/security/xamppsecurity.php
  7. Give your database a password, Movable Type will not run with an open database.
  8. Almost, hang in there. Edit the mt-config.cgi file with Notepad++ to have database have the same name as the one you just made, and to use the same password as the one you just set. Set CGIPath to /cgi-bin/mt/. Set StaticWebPath to /mt-static/. Set StaticFilePath to C:\xampp\htdocs\mt-static. And you know not to use the periods right, these are sentences, not code.
  9. Now go to your web host control panel and use their phpMyAdmin to export a zip file of the database for your Movable Type. Save it locally.
  10. In http://localhost/xampp/ go back to Tools>phpMyAdmin and select your shiny new database and click the import tab. Browse to the zip you just downloaded. Import the zip file.
 lost shrunk giantess horror high quality
move up a little to the right move down to the left
  1. Reboot. Yes welcome to Perl, set your watch back 30 years.
  2. Start both the Apache and mySQL services in the XAMPP control panel. Remember, everything is a test, so you have to click on the left two buttons to "install" the services, then go to the middle of the dialog box and click "Start" for both services.
  3. You can verify that localhost in the browser address bar works. Then type in the browser address bar http://localhost/cgi-bin/mt/mt.cgi You should get the Movable Type logon screen. Since you brought the database down from your webserver, the same user and password should work on this local install.
  4. When it doesn't work, and it won't, change the mt-config.cgi file name to anything else, mt-config.cgi-misery is good. Then type http://localhost/cgi-bin/mt/mt-check.cgi in the browser address bar. Now you are back where I was, and you might see that DBD::mysql is not installed. I have assumed you are using a mysql database, so now maybe go into C:\Strawberry\perl\bin\cpan.bat and click it. In the command window type install DBD::mysql. It should chug for a long time, very verbose and seem generally happy, lots of OKs and such. When it is done, type quit.
  5. Reboot
  6. Start up XAMPP Apache and mysql
  7. Try http://localhost/cgi-bin/mt/mt-check.cgi in the browser bar again.
  8. If you have DBD::mysql installed now, you can change the file-name mt-config.cgi-misery back to mt-config.cgi. Then try http://localhost/cgi-bin/mt/mt.cgi good luck.
 lost shrunk giantess horror high quality
move up a little to the right move down to the left
  1. If and when you did get this local Movable Type running, you need to go in the "Settings>General" of the website or top-level, and point the output files to where you want then to appear. So I left Website URL where it was, but changed Website Root to /Users/Paul/Docs/. The same deal, I don't want spaces in the path names, so I use Docs instead of My Documents. This of course is based on having XAMPP installed right under C:\.

If any single program, Win 7 Pro, XAMPP 5.6.3, Strawberry Perl 5.20.2.1 (64bit), Movable Type Pro 5.2.9 or even FileZilla and Notepad++ is different, none of this is likely to work and no one can help you. Note that you can use the regular ftp on Filezilla if you don't care about security. To use sftp I had to go up to Dreamhost and mess around to set some sftp setting in the domain I think it was. Suffer on soldier, suffer on.

The Step C, profit, part of this for me is that my Movable Type has really large scripts in the category page template so I get 504 Gateway Timeouts from DreamHost. They tell me things are taking to long so they kill the process. I thought about upgrading to a VPS, I sure can't afford a $200-a-month dedicated server, but then I still have a dog-slow Movable Type even if there are enough resources to not have the Gateway timeout.

Note you can point the Movable Type config file to still use the web database. There you have to go to your webhost, and for the user enable the IP address or the incoming address of the request. With the Brighthouse Networks here, that was a string with dashes between my IP address instead of periods and something like bbh.net concatenated to it.		 lost shrunk giantess horror high quality
move up a little to the right move down to the left
It turns out my Movable Type is still dog slow when I point it to the web database, so I am stuck with running a local Movable Type with a local database. Not the worse thing in the world, but I have to backup or mirror the database somewhere. My big deal is that its not too hard to set up this local Movable Type to generate HTML pages with the proper URLS and such. I am not running any dynamic  content, no comments, no trackbacks no external uses other than me. So I intend to just use this local Movable Type and the sftp the files up to Dreamhost, which will work fine slinging static HTML, even for 9 dollars a month.

[Update} The giant category template file creation that caused 504 Gateway timeout on the Dreamhost Movable Type install ran in 2:45 on my XP box with the old XAMPP and the kludge Perl I managed to get working. The box is a Athlon Thunderbird 4800+. The Lenovo Laptop (i7-3610QM CPU @ 2.3GHz) where I got this install running does the template files in 1:10, over twice as fast. It was worth the two days suffering to get this working.

And one cool-guy thing is you can run the local Movable Type from any computer on your LAN as long as the install box is powered up. Just type the IP address of the install box into the browser address bar and you should get the XAMPP page, then just figure out the paths to do the same mt.cgi file. For this you might want to go into your router and reserve the IP address so your install box will always have the same IP address.		 lost shrunk giantess horror high quality
move up a little to the right move down to the left

This post is in these categories:

Categories

 border bar
Bottom of first column This is the end.