A working remote V2Ray server (VMess, VLESS, or Trojan protocol) and its JSON configuration file. Step 1: Enable Container Support on RouterOS
: Script MikroTik to switch between different V2Ray backends if one server goes down.
If your V2Ray container is configured with a or TProxy inbound to handle raw IP packets: Create a new routing table for V2Ray traffic: /routing/table/add name=v2ray_route fib Use code with caution.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. v2ray mikrotik
This ensures that any packet with the proxy_mark routing mark is forwarded to the container’s IP address (our veth1 interface) for processing.
Example snippet for the inbounds section of your config.json :
/ip firewall nat add chain=dstnat protocol=tcp dst-port=80,443 action=redirect to-ports=8080 A working remote V2Ray server (VMess, VLESS, or
The question isn't if you should integrate them, but how . Running V2Ray on a separate PC or a Raspberry Pi adds latency and a single point of failure. Installing V2Ray directly on your MikroTik device (where possible) or routing traffic through an external V2Ray server via MikroTik's routing engine gives you enterprise-level control.
"inbounds": [ "port": 12345, "protocol": "dokodemo-door", "settings": "network": "tcp,udp", "followRedirect": true , "sniffing": "enabled": true, "destOverride": ["http", "tls"] ], "outbounds": [ "protocol": "vless", "settings": "vnext": [ "address": "your-remote-vps-ip.com", "port": 443, "users": [ "id": "your-uuid-here", "encryption": "none", "flow": "xtls-rprx-vision" ] ] , "streamSettings": "network": "tcp", "security": "reality", "realitySettings": "serverName": "://microsoft.com", "publicKey": "your-public-key" ] Use code with caution.
While MikroTik does not natively run the V2Ray core as a standard protocol, RouterOS v7 provides powerful mechanisms—such as native Xray/V2Ray client integration (via the vstp or upgraded proxy packages) or Docker containerization —to tunnel traffic seamlessly. This public link is valid for 7 days
/container/mounts add dst=/etc/xray/config.json src=/path/to/your/config.json name=xray-config
/routing/table/add name=to_v2ray fib /ip/route/add dst-address=0.0.0.0/0 gateway=192.168.88.254 routing-table=to_v2ray Use code with caution. Optimization and Troubleshooting Managing DNS Leaks
/ip firewall mangle add chain=prerouting src-address-list=!Proxy_List dst-address-list=Proxy_List \ action=mark-routing new-routing-mark=to_v2ray passthrough=yes Use code with caution. 3. Build the Dedicated Route