Before programing any time-lapse sequences, prepare the hardware and synchronize the communication channels. Step 1: Battery Installation Slide off the battery compartment covers on both units.
: Ensure both units are on the same channel (there are 16 available channels) to avoid interference from other devices.
In Bulb mode, ensure the Long Exposure (Lo) setting on the remote matches your desired duration, notes Manuals+.
The WTR-2 system consists of a and a Receiver (R) . aodelan wtr2 user manual
Dual-stage button. Half-press focuses; full-press triggers the shutter immediately.
Press the button to cycle through these four primary modes:
Insert fresh batteries into both the transmitter and receiver. In Bulb mode, ensure the Long Exposure (Lo)
| Specification | Details | |---------------|---------| | | 2.4GHz radio transmission | | Wireless range | Up to 60 meters (200 feet) indoors/outdoors | | Power source | 4 × AAA batteries (2 per unit, not included) | | Battery life | Varies by usage; no built‑in battery indicator | | Display | Backlit LCD screen | | Minimum interval | 0.1 second | | Maximum exposures (N) | 199 (with unlimited option) | | Shutter modes | S (single), C (continuous), B (bulb), 2S (2‑sec delay) | | Timer functions | DELAY, LONG, INTVL, N, BKLN | | Compatibility | Canon, Nikon, Sony, Fuji, Olympus, Panasonic cameras (cable‑dependent) | | Operating temperature | 0°C – 40°C (32°F – 104°F) typical for consumer electronics | | Dimensions (approx.) | Transmitter: 140 × 40 × 20 mm; Receiver: 60 × 35 × 30 mm |
Secures the receiver into the camera hot shoe. Setting Up the Hardware
Powers both the transmitter and receiver units. Key Hardware Controls interval shooting). | Upon initial activation
To ensure reliable operation, the transmitter and receiver must share the same digital channel (01 to 99) or use the Smart Channel mode (00).
| Button | Function | |--------|----------| | | Two-stage button: half-press for focus, full-press to release shutter. In Bulb mode, first press opens shutter, second press closes it. | | Backlight / Lock Button | Press and release to illuminate LCD for ~10 seconds. Press and hold to lock all buttons (lock icon appears); press and hold again to unlock. | | Sound / Mode Button | Cycles between shutter modes (S, C, B, 2S). The selected mode is indicated by a line on the LCD. | | Directional Buttons (▲/▼) | Navigate through timer settings (DELAY, LONG, INTVL, N, BKLN) and adjust values. | | SET Button | Confirms selections and enters/exits menu settings. | | Start/Stop Button | Starts and stops timer programs (e.g., interval shooting). |
Upon initial activation, the Aodelan WTR2 will prompt you to select your preferred language and configure your settings. Take a moment to familiarize yourself with the device's menu system, as this will be your gateway to accessing its various features.