Nokia G-010g-r Manual -

A: No. It must be provisioned by a GPON OLT that matches your ISP’s infrastructure. Serial number whitelisting is common.

Temperatures from -5°C to 45°C (23°F to 113°F); relative humidity from 5% to 95% non-condensing. 2. Hardware Installation Guide Follow these sequential steps to install the device. Step 1: Position the Device

admin or the serial number printed on the back label.

Identify the fiber optic terminal installed by your service provider. nokia g-010g-r manual

192.168.1.100 (or any address between 192.168.1.2 and 192.168.1.253) Subnet Mask: 255.255.255.0

The device features a compact design with specific physical interfaces on the rear or bottom:

This indicates a loss of signal (LOS) or poor fiber alignment. Temperatures from -5°C to 45°C (23°F to 113°F);

Ensure you are using a Cat5e or Cat6 Ethernet cable. 6. Frequently Asked Questions (FAQ)

Plug one end of an Ethernet cable into the LAN port of the Nokia G-010G-R and the other into the WAN port of your personal Wi-Fi router.

is a compact "bridge-only" device, meaning it converts fiber signals to a single Ethernet output but does not include built-in Wi-Fi or multiple LAN ports. It is typically provided by Internet Service Providers (ISPs) as the primary entry point for fiber-to-the-home (FTTH) services. Key Technical Specifications Specification Network Interface 1x GPON Port (SC/APC connector) User Interface 1x 10/100/1000Base-T Ethernet Port (RJ-45) Standard Compliance ITU-T G.984 (GPON) Max Throughput 2.488 Gbps downstream / 1.244 Gbps upstream Power Supply 12V DC, 0.5A Hardware Interface & LED Indicators Step 1: Position the Device admin or the

Connects to the green SC/APC fiber optic cable coming from your wall jack.

The G-010G-R supports up to 1Gbps. If you are getting slow speeds, ensure you are using a Ethernet cable. Older Cat5 cables are limited to 100Mbps. 6. Technical Specifications