Canon Ir1024 Default Admin Password [hot] Jun 2026
Select <Device Info./Other> > <Initialize Admin. Password> .
Log in if prompted (default credentials required).
On some variations of the iR1024, the default username may simply be "Administrator" with the password Why You Can’t Log In
You can often initialize just the administrator password without wiping all other settings. Follow these steps:
Press (Settings/Registration) on the device's control panel. Canon Ir1024 Default Admin Password
Turn the printer's physical power switch , wait 10 seconds, and turn it back ON .
Administrator (case-sensitive, with a capital 'A') Default Password: 7654321
If prompted, enter the password (if set) to proceed with initialization.
Enter a new PIN (up to 7 or 16 digits depending on your specific model) and confirm it. Select <Device Info
Their IT person was on vacation. So they called a local "copier guy."
No, in most modern firmware versions of the iR1024, a password is required to access the Administrator section.
If the above method does not work or if password initialization has been prohibited, you can use the device's service mode to clear the system administrator's password:
Are you trying to access the or the web browser interface ? Do you know the current IP address of your printer? Do you have access to the service mode menu? On some variations of the iR1024, the default
Press the Reset key to exit service mode.
Are you trying to resolve a specific error code like or E100 ?
Enter the license key if prompted and press <Start> > <OK> .