Maintenance Box Resetter For Epson L6170 Jun 2026

Before resetting the chip, it is crucial to either or ensure the box isn't physically overflowing with liquid ink to avoid a mess.

Slide the maintenance box back into its slot inside the printer until it clicks firmly into place.

Before diving into the reset process, it helps to understand what the maintenance box actually does. What is a Maintenance Box?

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Let's look at the two most practical methods you can use at home. maintenance box resetter for epson l6170

The resetter light will flash red for a few seconds, then turn solid green. Green means success.

It tricks your printer into believing a brand-new, empty maintenance box has been installed.

The maintenance box resetter is a small hardware dongle designed to interact with the chip on the maintenance box. In the case of the L6170, the printer’s lockout is not based on a physical sensor detecting liquid saturation, but rather a software counter on the chip.

Place the box back into the printer. The error should disappear, and the maintenance box status should show as empty (gray/white bar). Essential Safety Warning: Physical Maintenance Resetting the chip does not empty the ink. Before resetting the chip, it is crucial to

If the resetter light stays red, the pins are misaligned. Clean the gold chip contacts with rubbing alcohol and try again.

: He opened the rear cover and slid out the small plastic brick of the maintenance box.

A maintenance box resetter (often called a chip resetter) is a small, handheld plastic device equipped with several metal pins and a battery-powered internal circuit.

The official Epson remedy is to buy a genuine replacement maintenance box. While that certainly works, it can become expensive over the life of the printer, especially if you print heavily or perform frequent head cleanings. A allows you to continue using the same physical maintenance box by resetting its chip to “zero”, tricking the printer into thinking a fresh box has been installed. What is a Maintenance Box

If you have a resetter on hand, you can fix the error in 30 seconds rather than waiting days for a replacement part to ship. How to Use a Maintenance Box Resetter for Epson L6170

Check your printer screen or the Epson status monitor on your computer. The maintenance box indicator will now display 100% remaining capacity. Buying Guide: Choosing the Right Resetter

If you cannot access a physical resetter, you can use software to perform a "soft" reset. 1. Using WIC Reset Utility

Hold the chip resetter so its metal pins align perfectly with the metal pads on the T04D1 chip. Press the resetter firmly against the chip.