Anmeldung
Once the 0x146 eFuse is blown, the boot ROM bypasses BROM entry entirely at power‑on, making the device permanently locked out at the lowest hardware level.
She couldn't patch the Boot ROM. She couldn't bypass the efuse. 0x146 was a one-way door that had already slammed shut.
When the value at 0x146 is read by the SoC's power management or early boot logic:
In older MediaTek devices, BROM was an emergency recovery port that could be "forced" or bypassed using software exploits to flash unauthorized firmware or remove locks. To counter this, manufacturers began "blowing" a physical hardware fuse () during production. brom disabled by efuse 0x146
Secure boot will still check signatures. You can only write signed firmware.
If you are a mobile technician, an Android developer, or a custom ROM enthusiast working with chipsets, you have likely encountered a bricked or locked device that refuses to communicate via traditional low-level interfaces. Flashing tools like SP Flash Tool , MTK Client , or premium software suites (like Hydra Tool, UnlockTool, or TSM Pro) might throw a critical error: ERROR: BROM disabled by efuse 0x146
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Once the 0x146 eFuse is blown, the boot
These are tiny fuses on the silicon die of the processor. They are programmed (blown) at the factory during production. Once a fuse is blown, it cannot be reversed.
Device manufacturers (OEMs) use specific register configurations—such as —to declare permanent security profiles.
: Technicians use BROM mode to bypass device security protocols, perform deep formatting, or repair altered partitions without needing the phone to boot into the operating system. 0x146 was a one-way door that had already slammed shut
The hexadecimal value 0x146 is a status register code indicating that Why do manufacturers do this?
If the device is bricked, only an official service center with authorized servers can re-sign the secure boot chain to work with the blown fuse state. 4. Hardware Level Bypass (Test Point)
In practice, the error appears in the logs of flashing tools after the tool has successfully initialised the chip, but just when it tries to gain deeper BROM access:
If you're not comfortable attempting fixes yourself or if the device is no longer under warranty, seek professional help.
mtk printgpt
