Tutorial ((hot)) — Orcad 16.6

The design process begins in OrCAD Capture, where you create the logical representation of your circuit. Create Project : Open Capture CIS, select File > New > Project

Under the Physical Constraint Set, define your minimum trace width (e.g., 10 mils for signal tracks, 20-30 mils for power tracks). Close the Constraint Manager to apply the limits. Interactive Routing

To jump between layers, double-click while routing to drop a via connection, then continue routing on the new layer. Step 5: Manufacturing Output Generation

In the Options panel on the right, set the active class to and the subclass to Design_Outline . orcad 16.6 tutorial

OrCAD 16.6 is a powerful, integrated tool. This tutorial covered the fundamental flow: Schematic → Netlist → Layout → Routing → Manufacturing. Regular saving, running DRCs, and understanding footprint mapping are key to successful PCB design in OrCAD.

Tutorials for OrCAD 16.6 typically break down into these core areas:

Define your output directory and click . Resolve any syntax errors in the session log immediately. 4. PCB Board Layout in OrCAD PCB Editor The design process begins in OrCAD Capture, where

The schematic design environment where you draw your circuit, assign component values, and define electrical connections.

Move your cursor to the workspace canvas; your components will appear attached to your cursor one by one. Click to position them inside your board outline.

Once your layout passes physical inspection, generate manufacturing files (Gerbers) to send to your fabrication house. Generating Artwork Files (Gerber Data) Go to . This tutorial covered the fundamental flow: Schematic →

OrCAD 16.6 remains one of the most widely used versions of the Cadence PCB design suite due to its stability and comprehensive feature set. This tutorial provides a streamlined walkthrough for beginners to navigate the ecosystem, from initial schematic capture to the final PCB layout. Getting Started with OrCAD Capture

Tools > Design Rules Check . Ensure there are 0 errors. Generate Gerber Files: Go to Manufacture > Artwork . Generate Drill Files: Go to Manufacture > NC > NC Drill .