Kes Geyser Load Control Timer Manual New [best] -

: Displays the active program (e.g., 1 flash = Prog 1, 2 flashes = Prog 2).

Opens the timer setting menu and cycles through the 16 available on/off program slots.

Dust accumulation can trap heat. Ensure your DB board or auxiliary housing is clean and free of insects.

Connect to the incoming 220V Live wire from the geyser’s dedicated circuit breaker. kes geyser load control timer manual new

While holding , press D+ repeatedly until the correct day of the week appears at the top of the screen.

: Always ensure the mains power is switched off before attempting any internal wiring. Geyser Load Control Timer ISG1201 Guide | PDF - Scribd

This comprehensive manual provides complete instructions for installing, programming, and troubleshooting your new KES Geyser Load Control Timer. 1. Safety Warnings and Technical Specifications Critical Safety Precautions : Displays the active program (e

Connect a wire from on the timer to the neutral input side of the geyser isolator switch.

While holding the Clock button, press to adjust the current hour.

KES Geyser Load Control Timer Go to product viewer dialog for this item. Manual: A Complete Guide to Installation and Programming Ensure your DB board or auxiliary housing is

Don't let the complex settings scare you. The secret is in the scheduling: Heat water only when you need it.

Clip the device onto a standard 35mm Din-Rail or secure it via the built-in screw mount holes.

Turn off the main power switch inside the master DB box. Mount the Unit: