The board supports first-generation Intel Core processors with a maximum Thermal Design Power (TDP) of : Intel Core i7 (8xx series) Intel Core i5 (7xx and 6xx series) Intel Core i3 (5xx series) Intel Pentium (G69xx series)
While you can plug a modern SATA III SSD into this board, it will run at SATA II speeds (maximum ~275 MB/s). This is still significantly faster than a traditional mechanical hard drive.
Complete wiring layouts, clear jumper setting diagrams, and verified RAM upgrade rules. 2. HP Desktop Product Guides
: A comprehensive MS-7613 V1.1 Diagram is available on Scribd , showing the block diagram and device map.
| | Link / Source | Key Notes | | :--- | :--- | :--- | | Motherboard Manual | SuperComputerRepair.com | Downloadable .exe installer for Windows. | | BIOS Update | HP FTP Server (sp56189.exe) | Version 6.18 Rev. A. Requires Windows 7 and administrator privileges to install. | | General Drivers | HP Support Website | Drivers for various HP models that used the MS-7613 motherboard. | ms 7613 ver 11 motherboard manual link
The (often referred to as the Iona-GL8E or "Boston-GL6" in HP documentation) is a legacy Micro-ATX motherboard produced by MSI for HP and Compaq OEM desktop PCs. It was primarily used in HP Pavilion and Compaq Presario systems around 2010.
I’ve already checked MSI’s official website under legacy/retired products but couldn’t find the direct manual for MS-7613 VER 1.1.
A detailed manual and block diagram for Ver 1.1 can be viewed on Scribd .
Connect the Power SW wire here. This controls the chassis power button. Polarity does not matter. Pin 9: Reserved / Not used. 5. Rear I/O Ports | | BIOS Update | HP FTP Server (sp56189
Thanks in advance!
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The MS-7613 Version 1.1 motherboard is an OEM board manufactured by MSI. Hewlett-Packard (HP) widely used this board in its desktop computers. HP officially named this specific motherboard the .
Here is the information regarding the manual and technical specifications for the motherboard. 💡 Quick Summary: The MS-7613 motherboard and i7 processors
Migrating the MS-7613 board to a custom chassis is common but can be challenging due to the lack of clear labeling on the PCB itself. Technical schematics from the Scribd MS-7613 Diagram Overview help identify these internal layouts: Front Panel Header Connection
is an OEM motherboard produced by Pegatron (under MSI design) for HP/Compaq desktops. It is built on the Intel H57 chipset, designed to support the first generation of Intel Core i-series processors (LGA1156). It is a Micro-ATX board with a
Here are some key features and specifications of the MS 7613 Ver 11 motherboard:
Compatible with first-generation Intel Core i3, i5, and i7 processors, including the i7-8xx (Lynnfield) and i5-6xx (Clarkdale) series.