Do not induce vomiting unless specifically directed by medical personnel. Rinse the mouth with water, give 1–2 glasses of water if the patient is fully conscious, and call a physician immediately. Equipment Installation and Engineering Controls
SECTION 02 COMPOSITION. AND INFORMATION. ON INGREDIENTS. Our hazard evaluation has identified the following chemical ingredient(s) files.dep.state.pa.us NALCO MATERIAL SAFETY DATA SHEET
Yes. Use a hydraulically actuated diaphragm pump with PTFE heads. Avoid mechanical seal pumps. nalco 3272 msds install
Nitrile, neoprene, or PVC gloves and chemical-resistant aprons.
Nalco 3272 typically consists of blended organic phosphonates, polymers, and alkaline agents designed to prevent mineral precipitation and metal passivation. According to OSHA GHS standards, the concentrate is classified as a hazardous chemical, primarily due to its corrosive or irritant properties. Do not induce vomiting unless specifically directed by
The regulatory shift from Material Safety Data Sheets (MSDS) to the GHS-aligned Safety Data Sheets (SDS) requires standard safety headings. Anyone installing or operating a NALCO 3272 injection loop must thoroughly understand the product's hazards.
Highly corrosive to eye tissue; can cause irreversible damage without immediate irrigation. AND INFORMATION
Before "installing" or dosing this chemical into your system, ensure the following protective measures are in place: Eye Protection: Always wear chemical splash goggles. Skin Protection:
| Ingredient | CAS Number | Weight % | | :--- | :--- | :--- | | | 2634-33-5 | 1.0 - 5.0% | | 2-Methyl-4-isothiazolin-3-one (MIT) | 2682-20-4 | < 1.0% | | Magnesium Nitrate | 10377-60-3 | 10 - 30% | | Non-hazardous ingredients | Proprietary | Balance |
Keep away from strong acids and oxidizing agents. Refer to Section 10 of the SDS for a definitive list of incompatible materials specific to the lot. Containment Setup
