Do NOT plug the PLC in yet. First, prepare Device Manager.
Remember these three golden rules:
Comprehensive Guide to Xinje PLC USB Driver Installation Connecting a PC to a Xinje PLC requires a dedicated USB driver. This driver enables communication between the programming software (XBuilder or XCPro) and the PLC hardware. Follow this step-by-step guide to successfully install the driver and troubleshoot common connection issues. Prerequisites Before Installation xinje plc usb driver install
In Device Manager, check under or Universal Serial Bus controllers .
The most straightforward way to get the USB driver is by letting the Xinje programming software handle it during its initial setup. Do NOT plug the PLC in yet
In this paper, we have provided a step-by-step guide on installing the Xinjie PLC USB driver. By following these steps, you should be able to successfully install the driver and communicate with the Xinjie PLC using a computer. If you encounter any issues, refer to the troubleshooting section or contact the manufacturer's technical support.
: Try a different USB port (preferably a USB 2.0 port on the back of the PC) or replace the USB cable. The most straightforward way to get the USB
To help narrow down any remaining connection issues, tell me: Which are you using (XC, XD, or XL)? What Windows version is running on your computer?
The Xinje USB driver is not available as a standalone download from the official website. Instead, it's bundled within the . Therefore, you must download the complete XDPPro software suite.