Each of these is displayed for about 10 seconds before cycling to the next one. This automatic cycle is a key feature, so you don't need to press any buttons to see the date or temperature. To switch the temperature unit between °C and °F, press and hold the button for a few seconds.
Press once to jump from the time display to the date display (it will show a default date like 1-01 ).
The built-in temperature sensor has a measuring range of -10°C to +50°C (14°F to 122°F).
: Toggles the display brightness level manually and increases value digits. dt-6507 led mirror clock instructions
Ensure the device is currently in standard clock mode before initiating these steps.
Complete User Manual and Troubleshooting Guide for the DT-6507 LED Mirror Clock
The day digits will flash. Use or DOWN to adjust, then press MODE to save. 3. Configuring the Alarm and Snooze Each of these is displayed for about 10
Press or DOWN until you reach the correct hour. Note: In 12-hour mode, a small indicator light will appear for PM. Press MODE once to confirm.
: When running purely on battery power, the clock enters an automatic Energy Saving Mode . The display will turn off after roughly 15 seconds to preserve battery life.
: While viewing the temperature, press the DOWN button to toggle between Celsius ( °C ) and Fahrenheit ( °F ). 5. Brightness and Night Mode Adjustments Press once to jump from the time display
Press the button repeatedly while in standard time mode to toggle the LED display between two brightness levels: bright and dim. Automated Night Mode
Tap again; the Snooze interval length display will flash (indicated by a default value of 5 ).
Press once to switch from the time display to the date display.