: Powered directly by the transceiver's internal 13.8V DC rail. 🔌 Installation Overview
The Icom UI-7 is an optional, internal circuit board designed by Icom to add FM (Frequency Modulation) transmit/receive capabilities and optimize AM (Amplitude Modulation) performance on select HF (High Frequency) transceivers and receivers.
For ham radio operators using the IC-725 or IC-726, the UI-7 opens up the top end of the 10-meter band (29.5 to 29.7 MHz). This slice of the spectrum is famous for FM repeater operations. When atmospheric conditions (propagation) open up, a 10-meter FM signal can travel thousands of miles using minimal power, offering a unique operating thrill. 3. Improved AM Audio Routing
Keywords integrated: icom ui-7 am fm unit, Icom UI-7, UI-7 AM/FM, IC-M605 handset, marine VHF with AM/FM, Icom remote mic, DSC handset. icom ui-7 am fm unit
A common challenge for buyers of these classic radios is determining if the UI-7 is present without opening the case. Here is a useful guide:
: The unit typically mounts to a specific area on the main or front-panel board using provided screws or standoffs.
Remove the top and bottom covers of the transceiver by unscrewing the designated chassis screws. : Powered directly by the transceiver's internal 13
The UI-7 is a fully functional DSC controller. It features a dedicated under a protective cover, along with individual buttons for position request, position send, and individual calls. The large, backlit LCD screen displays GPS position data, MMSI numbers, and DSC call status.
💡 : If you are buying a used IC-725 or IC-728, always check if the UI-7 is already installed. Many operators consider it a "must-have" for full utility, and finding the standalone module today can be difficult as they are no longer in production. If you'd like, I can help you with:
Mount the PCB using the factory-provided screw holes. Ensure the board sits flush and does not pinch any surrounding wires. This slice of the spectrum is famous for
Carefully align the multi-pin connector of the UI-7 module with the receiver motherboard socket. Ensure no pins are bent during alignment.
First she cleaned the contacts, coaxed the stiff tuning dial with a little heat and a lot of patience, replaced a capacitor that had swollen like a tired heart, and traced microfractures in the wiring beneath the chassis. Each small repair was a conversation — a bristling of old solder and the soft chime of metal that obeyed. At night, when the shop was quiet, she would sit under the lamp and let the radio rest beside her like an old companion.
Today, the UI-7 is a highly sought-after component in the secondhand amateur radio market. Finding, installing, and configuring this module requires a blend of technical know-how and historical appreciation for classic radio engineering. Technical Specifications and Capabilities
for many years. Today, it is primarily found as a "second-hand" item on hobbyist sites like Radioworld UK or through used marketplaces like
