Hks-va028-v2.0 =link= Jun 2026

The "hks-va028-v2.0" is a practical digital voltmeter and ammeter module. While its primary use is monitoring voltage and current, its true value lies in its versatility, serving as a critical tool for diagnostics and system management. However, success with this module hinges on correct wiring and an understanding of the basics of electronics. With the information in this guide, you should be well-equipped to get the most out of your device.

DC 4.5-30V (with reverse polarity protection) Voltage Measurement Range: 0-99.9V DC Current Measurement Range: 0-10A DC

: HKS is a prominent brand in performance tuning, though "va028" is more characteristic of a specific internal electronic board or module.

: Integration is easier than ever. The updated firmware (v2.0) ensures seamless communication with modern control systems, reducing setup time by nearly half. Increased Lifespan hks-va028-v2.0

0.28" dual LED; typically red for voltage and blue/green for current. Accuracy: Approximately ±1%. Refresh Rate: ~300ms to 500ms. 🔌 Wiring and Pinout

If your target system runs below 30V, it can power the module directly.

Why should you care about the jump from v1.0 to v2.0? Here are the three main highlights: Optimized Thermal Management The "hks-va028-v2

HKS-VA028-V2.0 - Woltomierz Amperomierz LED 99V/10A red/blue 12V 26x46mm. Wekton Electronics, sklep Łódź. WEKTON Electronics

This comprehensive technical guide details the specifications, structural layout, wiring configurations, and practical applications of the HKS-VA028-V2.0 module. Key Technical Specifications The core appeal of the HKS-VA028-V2.0 Go to product viewer dialog for this item.

Owners of the original HKS VA028 often reported two minor but irritating flaws: and diaphragm fatigue after years of track abuse. HKS R&D listened. With the information in this guide, you should

Attach the wastegate to the manifold using the supplied studs and brass nuts. Critical: Apply copper anti-seize to the stud threads. Torque in a cross pattern to 20 Nm.

The input supply voltage on the thin red wire is dropping below the 4.5V threshold. Move the module power feed to a more stable or isolated DC source.

DC 4–30V (Note: Exceeding 30V on the power input will damage the unit). Accuracy: Typically ±1%. Dimensions: Approximately 48mm x 29mm x 26mm. Wiring Guide The device usually comes with two wire harnesses: Thin Wire Harness (Power & Sensing): Red: Power supply positive (4–30V). Black: Power supply negative/ground.

lies in its high functionality crammed into a compact, space-saving layout. Below are its structural and operational parameters: Specification