Compair Cyclon 111 Manual -
The Cyclon 111 is designed for medium-duty industrial applications, offering high-efficiency air delivery in a space-saving footprint. Motor Power: 11 kW (15 HP) Air Displacement: Approximately 1.67 m³/min (59 CFM) Max Working Pressure: 8.2 Bar (120 PSI) Drive System:
| Feature | CompAir Cyclon 111 | Typical Competitor (e.g., GA 11) | Older CompAir Model | |--------|--------------------|-----------------------------------|----------------------| | | Direct drive (most variants) | Gear or belt | Belt only | | Controller | Delcos (simple analog or basic digital) | Elektronikon (full digital + remote) | Relay logic | | Oil separator access | Spin-on / drop-in element – side panel | Top or rear access | Flanged, bolt-on | | Noise level | ~66–70 dB(A) @ 1m (with enclosure) | ~67 dB(A) | ~75 dB(A) | | Cooling fan motor | Separate axial fan (low power) | Integrated into main motor | Belt-driven fan | | Start/stop cycles allowed | Up to 12–15 starts/hour | Up to 20 starts/hour | 6–8 starts/hour | | Service interval | 2000–4000 hours (oil type dependent) | 4000–8000 hours (if synthetic oil) | 1000–2000 hours |
The is a stationary, direct-drive, oil-injected rotary screw compressor. It was designed for continuous operation in industrial environments. Key specifications typically include:
Periodic servicing is the only way to maintain the manufacturer's warranty and ensure trouble-free operation. Using is strongly recommended to prevent expensive breakdowns. Cyclon Rotary Screw Compressors Guide | PDF - Scribd
(Fluid Force) and spin-on oil filters to protect the air-end. Filtration: Compair Cyclon 111 Manual
Only qualified technicians should operate or service the machine.
: Due to its weight, users must use an appropriate hoist and shackles when moving the unit, as cables should never be applied directly to lifting eyes. Verdict Cyclon Rotary Screw Compressors Guide | PDF - Scribd
A: Only if the alternative meets ISO VG 46, has anti-foam additives, and is approved for rotary screw compressors. Mixing is strictly prohibited.
This guide provides the essential technical knowledge you need. To unlock the full potential of your equipment, the next steps are clear: The Cyclon 111 is designed for medium-duty industrial
Never remove or tamper with the pressure relief valves or guards.
Includes a minimum pressure/non-return valve that ensures system pressure stays above 4-4.5 bar for proper oil circulation. Installation:
If you do not yet have a copy:
To keep your Cyclon 111 running at peak efficiency, the manual emphasizes several routine checks: Air/Oil Separation Troubleshooting (Service Diagnosis)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Change the air filter and check the oil separator.
It is tempting to rely on intuition or generic compressor knowledge, but the Cyclon 111 has specific nuances. The official manual provides:
: Critical intervals for changing oil filters, separator elements, and air intake filters to maintain a 2–3 mg/ oil carryover rate. Troubleshooting (Service Diagnosis)
