Sinotimer Svp-916 Manual Pdf Online

Connect the incoming main power lines to the top terminals. L (Line/Phase): Usually the brown or red wire. N (Neutral): Usually the blue or black wire.

If set to HA (Manual Reset), you must manually clear the fault once conditions are safe. Error Indicator Codes

Available in 40A, 63A, and 80A current capacities. Rated Voltage: 230V AC, 50Hz/60Hz. Sinotimer Svp-916 Manual Pdf

Sinotimer SVP-916 Go to product viewer dialog for this item.

Check the incoming line voltage with a multimeter at the IN terminals. Ensure the wires are stripped properly and clamped securely inside the terminal blocks. Connect the incoming main power lines to the top terminals

This stumps most beginners. The manual’s section shows the exact sequence:

Check the top input terminals with a multimeter. Ensure that live and neutral are not swapped and that the wires are stripped properly and clamped firmly inside the terminals. If set to HA (Manual Reset), you must

Connect the Neutral wire leading to your household load/appliances to the terminal.

The is an intelligent, dual-display, automatic over-voltage, under-voltage, and over-current protection device designed for single-phase AC 230V systems. It safeguards domestic appliances and distribution lines by cutting off power during electrical faults and restoring it automatically when parameters normalize.

The SVP-916 uses visual indicators to show exactly why it cut the power to your home. 1. High Voltage Flashing Grid voltage exceeded your U1 limit.