Scans the NAND flash memory, detects corrupted sectors, and masks them to restore stability.
Before running MPTools, you must confirm your flash drive uses a FirstChip FC1178 or FC1179 controller. Using the wrong tool can permanently break your device. Download or Flash Drive Information Extractor .
This error appears when the tool detects the controller but cannot identify the NAND Flash chip. Solutions:
Download the Package: Locate the FirstChip_MpTools_2020-11-18 (V1.0.5.2) archive. firstchip fc1178 fc1179 mptools v1052 install
Unlike normal software, there is . The “installation” is simply extracting a compressed folder.
Fix: The version V1052 database does not contain the specific configuration file for your unique NAND flash memory. You will need to hunt for a newer version of the FirstChip MPTool database or manually add the flash ID string to the software's FlashList.ini file.
Click on the button positioned on the right navigation pane. Scans the NAND flash memory, detects corrupted sectors,
: Connect your flash drive directly to a motherboard USB 2.0 port. Avoid USB 3.0 ports, external hubs, or front-panel ports, as they can cause data signal drops during transmission. How to Install and Run FirstChip MPTools V1052
| Potential Cause | Solution | |---|---| | Driver conflict | Uninstall USB drivers in Device Manager, reboot, and reconnect | | Windows version | Try Windows 7 or a Windows 10/11 virtual machine (VMware Workstation) | | Hardware failure | The controller itself may be physically damaged |
MPTools contains low-level hardware drivers. Windows Defender and third-party antivirus suites frequently flag these files as Trojan or heuristic threats. Temporarily pause real-time protection before extracting the archive. 3. Use the Correct Hardware Interface Download or Flash Drive Information Extractor
Click to preserve the custom configurations and return to the primary visual device grid matrix. Step 5: Executing the Low-Level Flash Process
The software should automatically detect your USB drive in one of the port slots.
Click on the or Bin Settings button on the right panel (leave the password blank if prompted, or press enter). Optimizing Settings :