Mikrotik Router Quick Setup Link Updated File

Best for standard home setups with Wi-Fi.

Launch WinBox and navigate to the tab at the bottom.

Look for the section at the bottom right corner of the Quick Set page.

Did you know you can automate the Quick Setup process? For consultants or MSPs, you can create a "magic link" that pre-configures the router.

Select this only if your ISP gave you a specific IP address, Subnet Mask, and Gateway to type in manually. 3. Setup the Wireless Network (Middle Column)

Click the button (usually located in the top-right or bottom-right corner).

Plug your computer into any of the remaining ethernet ports (e.g., Ether2, Ether3, or Ether4).

First Time Configuration - RouterOS - MikroTik Documentation

: Plug the power adapter into your MikroTik router and a wall outlet. Wait for the blue or green LED lights to stabilize.

Make sure your computer is plugged into Port 2, 3, or 4. It will not load if you are plugged into Port 1.

Ensure this is checked so devices on ether2-5 can communicate.

In the top-left corner, choose the appropriate mode for your device. For a standard home or office network, select or WISP AP . 2. Configure the Internet Connection (WAN)

Download the official utility from the MikroTik software page. Open WinBox and click on the Neighbors tab.