| Error in tool | Likely cause | Fix | |---------------|--------------|-----| | Timeout (0x2001) | Wrong service mode, bad USB cable | Re-enter service mode, try different port | | EEPROM mismatch | Tool version vs printer region mismatch | Use correct regional version of tool | | Write failed (0x5005) | EEPROM write-protected | Perform full power cycle, retry | | Firmware not compatible | .upd file for different model | Double-check model number in printer info |
The (ST6000) is a Windows-based utility designed for advanced diagnostics and maintenance of Canon inkjet printers . Often used to resolve the common "Ink Absorber Full" error (Support Codes 5B00, 5B02), this tool allows users to reset internal counters and perform deep system calibrations. Key Features of Service Tool 6000
Close all printer queues. Restart the printer and repeat the Service Mode button sequence carefully. canon service tool 6000
Press the printer’s physical button to turn the machine off.
: TS5000, TS6000, TS8000, TS9000, TS5120, TS6320 | Error in tool | Likely cause |
Step 2: How to Use Canon Service Tool v6000 to Reset the Counter
Disclaimer: Proceed with caution when cleaning printer internals to avoid damaging delicate components. If you'd like, I can: Restart the printer and repeat the Service Mode
: G1000, G2000, G3000, G4000, G1010, G2010, G3010, G4010
A small pop-up window should say "A function was finished." Click OK. Next, move down to the section. Set the Counter Value (%) to 0 and click Set .
The printer's green power light will flash for a few seconds and then stay solidly lit. Your computer may play a "New Hardware Found" sound. Your printer is now successfully in Service Mode.
Before you run the tool, you must understand the risks. This tool can write to the printer’s permanent memory. One wrong click can erase critical calibration data.