Becsys5 Installation And Technical Manual __top__ [2026]

Connect BEC-IO16 modules via the (RJ12 cable, max 1m). Do not exceed 8 modules per controller.

Once all connections are verified, power on the controller. The display brightness and contrast can be adjusted by holding down either the up or down arrow keys for two seconds. After the controller beeps three times, use the up and down keys to adjust the contrast.

is a high-performance water chemistry controller designed for commercial aquatic facilities like pools, spas, and water parks. Managing it effectively requires a solid understanding of both its physical installation and the technical logic that keeps your water crystal clear. becsys5 installation and technical manual

Open the front door of the controller to find the wiring board. Power Input Connect the main power cord to a standard grounded outlet. Use a GFCI-protected outlet for safety. Connecting Sensors

: If a controller does not appear:

If motherboard replaced, perform license transfer: Email support@becsys.com with old and new dongle IDs (found in License Manager).

: Features standard Gbit Ethernet and supports remote access via the BECSys Live! web portal and mobile apps. Operation and Maintenance Connect BEC-IO16 modules via the (RJ12 cable, max 1m)

The BECSys5 offers three flow cell configurations: