: This action is a simple on/off toggle. If you ever need the alarm again, pressing the S and D buttons simultaneously will turn it back on and the bell icon will reappear.
"Device: Nako NA-613D. Action: Alarm function disabled."
Press the button twice to enter the alarm configuration mode. Press S to cycle between editing the Hours and Minutes .
If your variant features buttons on the rear chassis, you will generally disable the alarm by holding the button and pressing UP or DOWN . Troubleshooting Common Issues The Bell Icon is Gone, But It Still Rings
Ensure the clock is not in setting mode or stopwatch mode. You should see the time, seconds, and day of the week.
If you disabled the alarm by pressing [S] and [D] but the bell icon did not disappear, try the following:
Before disabling the alarm, it’s crucial to understand what triggers it. The Nako NA-613D is a 4G GPS tracker equipped with multiple alarm features:
Are you tired of the annoying alarm on your Nako NA-613D? Do you want to know how to disable it? Look no further! In this post, I'll guide you through the simple steps to turn off the alarm on your Nako NA-613D.
The Nako NA-613D also features an hourly chime that beeps every hour on the hour. This is a separate function from the alarm, so even if you disable the alarm, the hourly chime may still activate. If you want to disable that as well:
Press to select between the hour and minute digits (the selected value will flash).