Redsail machines are versatile and work with several industry-standard programs. Here are the most common options and how to set them up: 1. Artcut (Standard/Classic)
Most Redsail cutting plotters use one of two types of USB-to-Serial converter chips: or CH341 . To identify which one your plotter uses:
Disclaimer: Some steps are based on older software versions; always check Redsail's official site for the latest instructions.
Insert the ArtCut software disc or open the downloaded setup folder. redsail cutting plotter software installation
To ensure everything is set up correctly, you should perform a test cut.
Set the connection type to the COM port found in the Device Manager. C. CorelDRAW Plugin (Cutting Plotter Controller)
Most Redsail software (like Artcut) requires a physical USB key to run. Redsail machines are versatile and work with several
Install Artcut first, then connect the plotter.
Setting up a Redsail cutting plotter is a two-step dance: first, you need the right drivers to help your computer "talk" to the hardware, and then you need design software to send your creations to the blade. Whether you're a seasoned sign-maker or a hobbyist, this guide covers the essential installation steps for most Redsail models. 🛠️ Step 1: Physical Connection and USB Drivers
Click the on your toolbar to launch the cutting popup window. To identify which one your plotter uses: Disclaimer:
This is where you tell the software which COM port Windows assigned to your USB cable. You can find the COM port number in Windows Device Manager, under "Ports (COM & LPT)". It will be listed next to your USB-to-Serial device (e.g., COM3).
Once the computer recognizes the plotter, you must link your software to that specific COM port. Artcut (Commonly bundled) Set Up Device : Open Artcut and go to the Select Model as the manufacturer and your specific model (e.g., Redsail HP-GL Port Settings Parameters . Select the found in Device Manager and set Flow Control FlexiSIGN-PRO