: Every page printed and head cleaning cycle adds to a digital counter.
: Printers track waste ink volume to prevent physical leakage.
If you get this error, it means the tool did not properly enter service mode. Turn off the printer and try Phase 1 again.
Press and hold the Stop/Reset (or Triangle) button. Canon service mode tool version 1.050
To use the software, the printer must first be placed in manually. Maintenance mode / Ink Waste absorber reset
The is a specialized legacy software utility designed for diagnosing, configuring, and clearing specific internal system locks on older Canon PIXMA, MP, and iP-series inkjet printers. Most notably, this utility acts as an independent maintenance application to resolve the dreaded "Ink Absorber Full" warning—often manifesting as Error Code 5B00 or consecutive flashing green and orange lights.
: Clear EEPROM data, adjust margins, and set regional destination codes. Supported Models : Every page printed and head cleaning cycle
The is designed for specific older to mid-generation Canon PIXMA printers. It communicates directly with the printer’s firmware to:
| Error Code | Meaning | Solution | |------------|---------------------------------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------| | | The requested operation is not supported by your printer model. This is common when trying to reset the waste ink counter on models where it's not possible. | Ignore the error and only use functions that your printer is known to support. | | 005 | The Service Tool does not detect the printer. | The printer may not have completed entering Service Mode. Wait for the power LED to stop flashing before clicking any button in the tool. | | 006 | The printer is not in Service Mode, or the Service Tool version does not support your printer. | Power off the printer and repeat the button sequence to enter Service Mode. If the error persists, your printer model is incompatible with this version of the tool. | | 007/009 | Another fault is preventing Service Mode from initializing, such as an empty ink cartridge or a different hardware failure alongside the waste ink error. | Resolve the other fault (e.g., replace the empty cartridge) before attempting to enter Service Mode again. |
: Supports legacy models such as the MG5100/MG5200/MG6100/MG8100 series, MP230/MP280/MP490 series, and iP2700/iP3600/iP4800/iP4900 series. Standard Operational Workflow Service Mode Tools Version 1 050exe - Facebook Turn off the printer and try Phase 1 again
Canon Service Mode Tool version 1.050 is a Windows-based utility used primarily for maintenance tasks on specific Canon PIXMA printer models. While essential for technical repairs, it is an unofficial third-party download for most consumers and carries significant security risks. Tool Overview This version is designed to interact with a printer's Service Mode
The Canon Service Mode Tool v1.050 (often found as canon service tool v1.050.exe or similar) is a third-party utility designed to interface with Canon printers (especially PIXMA, MAXIFY, and some imageCLASS models) at a firmware level. It allows users to access normally reserved for authorized Canon repair centers, such as resetting ink absorber counters, performing nozzle checks, changing destination settings (region), and clearing certain error codes (e.g., 5B00, 5B01, 6000).
The feature selected is not supported by your specific printer model.
MG5100, MG5200, MG5300, MG6100, MG6200, MG8100, MG8200.