The RT-100 features a built-in visual and audible safety alert.
the power button while on to switch between Average and Peak (Maximum) reading modes. Buzzer/Alarm Control:
Do not use the meter to measure radiation while it is actively plugged into a charger, as the incoming electrical current will warp and invalidate your measurement results. 7. Troubleshooting Common Issues The meter keeps beeping constantly even in empty rooms
| Field Type | Alarm Threshold | Action | |------------|----------------|--------| | | > 0.4 μT (4 mG) | Screen turns red, backlight flashes, buzzer sounds | | Electric Field | > 40 V/m | Screen turns red, indicator flashes, buzzer sounds | | RF Field (RT-100S only) | > 10 mW/m² | Audio/visual alarms activate | erickhill rt-100 user manual
The manual doesn't always explain this stuff.
To get the most out of your ErickHill RT-100 user manual:
Lost the manual? Here are the basics:
If your meter spikes into the range, it does not mean immediate danger, but it indicates a strong electromagnetic source. The easiest fix for EMF exposure is distance; moving even 1 to 2 feet away from most household appliances will drop the readings back down to zero. 🔋 Maintenance, Calibration, and Troubleshooting Low Battery Warning
: Store in a cool, dry place and recharge periodically to maintain battery health. Manuals & Downloads - erickhill
| Task | Frequency | Instructions | |------|-----------|--------------| | | As needed | Wipe the plastic housing and screen with a soft, dry cloth. Avoid liquids and solvents. | | Charging | When battery indicator is low | Use only the provided USB cable. Avoid overcharging overnight repeatedly, though the device has built-in protection. | | Storage | Long-term | Store in a cool, dry place. Charge to approximately 50% before extended storage periods. | | Firmware | As available | Check the official ERICKHILL website for any firmware updates (rare for this model). | The RT-100 features a built-in visual and audible
Are you facing a (like an error code or inaccurate reading) with your unit?
: Short press the power button to turn the meter on. Measurement Modes : V/m : Measures the AC electric field. μT / mG : Measures the magnetic field.
: Long press the buzzer button to turn the sound on or off for quiet testing. Here are the basics: If your meter spikes
Wipe with a dry cloth. Never use water or chemicals. 8. Specifications Voltage: 110V - 125V AC GFCI Test Current: ~ 5mA Dimensions: 2.56 × 2.56 × 2.36 inches Weight: ~ 0.12 lbs
This comprehensive guide acts as a user manual, troubleshooting guide, and educational resource for the Erickhill RT-100 Circuit Tester Go to product viewer dialog for this item.