The BX60’s LED indicators or analog gauge will show:
: Use ONLY for 12V Lead-Acid batteries. Do not use for NiCad, Lithium, or dry cell batteries. 2. Pre-Charge Preparation
Surface charge or sulfated battery. The BX60 sees voltage (~12.8V) but there is no capacity (amps). Solution: Run a "desulfation" cycle if your BX60 model has a "Repair" mode. Otherwise, load-test the battery. bradex bx60 battery charger instructions high quality
Working with automotive batteries carries inherent risks of electrical shock and explosive gases. Always adhere to these safety measures before plugging in your device:
Ensure the power cables, alligator clamps, and main housing show no signs of cracks, frays, or damage before plugging the unit into a socket. The BX60’s LED indicators or analog gauge will
Ensure the charger's main power switch is in the OFF position before connecting or disconnecting the clamps.
: Designed with double insulation, which eliminates the need for a separate earth connection. Comprehensive Safety Systems : Pre-Charge Preparation Surface charge or sulfated battery
Best for maintaining a battery over a long period or for smaller batteries.
plug the charger into the AC wall outlet until all battery connections are secure. Positive Connection : Attach the crocodile clip to the positive terminal of the battery. Negative Connection : Attach the crocodile clip to the negative terminal of the battery.
Depending on the specific BX60 model variation, you may have a switch or button for charge rate.