Niton Xlt 898 User Manual ~upd~

Maintain a clearance zone of at least 10 feet behind the sample. Sample Handling Safety Do not hold samples in your hand during testing. Use a dedicated test stand for small or irregular items. 2. Technical Specifications & Features

One of the most underutilized sections:

Ensure no gaps exist between the device nosepiece and the material surface.

is a foundational, portable X-ray fluorescence (XRF) analyzer designed for rapid, non-destructive elemental analysis. Even as newer models emerge, the Xlt 898 remains a rugged, trusted instrument in industries such as metal alloy identification (PMI), mining exploration, and environmental screening.

You must perform a System Check at the start of every shift, or if the ambient temperature shifts significantly. Niton Xlt 898 User Manual

uses a rechargeable Lithium-ion battery pack. To install, slide the battery into the keyed cavity at the rear of the analyzer until it clicks into place.

For standard alloys, a minimum of 10 seconds is recommended, though this is user-definable.

The Niton XLT 898 User Manual is organized into several sections, including:

Maintain an active inventory log and record routine leak tests if mandated by law. End-of-Life Disposal Maintain a clearance zone of at least 10

: Sorts stainless steels, low-alloy steels, and nickel alloys.

The kapton window (nose tip) protects the detector. If it becomes punctured or dirty, it must be replaced immediately to prevent contamination of the detector.

utilizes an X-ray tube source (35kV/1.0W), strict safety protocols must be followed:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Even as newer models emerge, the Xlt 898

The system is password-protected for safety and security. Enter your assigned password via the touch-screen interface to access the main menu. 2. Operation and Testing Modes

with Peltier cooling, offering a resolution better than 220 eV at the Mn K-alpha line. Fundamental Parameters (FP):

The Niton XLt 898 features specialized software modes tailored to specific material groups and testing environments. Metal and Alloy Analysis Mode

The grade ID and full elemental chemistry will appear on the screen within seconds.