Siemens Cashpower 2000 Pre Paid Meter User Manual Verified Jun 2026

Save this post for future reference – and share with anyone using a Cashpower 2000 meter.

The meter case was opened. Request a tamper reset token from your utility company. Internal memory error.

#SiemensCashpower2000 #PrepaidMeterManual #VerifiedDocumentation #UtilitySupport

Flashes faster as electricity consumption increases.

(Standard Transfer Specification) token from your utility provider. Type the 20 digits into the CIU keypad. Enter/Red button siemens cashpower 2000 pre paid meter user manual verified

: Enter a new credit token. If it still won't accept the token, the relay may need to be reset by an authorized technician.

Recommend downloading and keeping a copy near your distribution board.

: If your meter continues to flash error screens or rejects tokens despite following this guide, locate your 11-digit serial number using 000 and contact your local municipal utility provider to request an engineering override token . Share public link

Check that the CIU is plugged in. If it uses batteries, ensure they are 1.5V AA batteries and installed correctly. Save this post for future reference – and

: Displays the total kilowatt-hours (kWh) consumed since the meter was installed.

This is the most common task for any prepaid meter user. Follow these steps exactly:

Review the typed sequence on the screen to confirm accuracy.

If the meter displays Reject or Error , do NOT re-enter the same token immediately. Move to Part 5 of this guide. Internal memory error

If your meter isn't working correctly, check the following indicators or error codes:

For any issue not covered here, always refer to the obtained from your utility or Siemens directly. Avoid generic “cheat sheets” found on social media—they often contain errors that can lock your meter.

What specific is showing on your screen?

– Displays the pre-configured power threshold limit (maximum load in Watts).