Close the . The house is now running on water directed through the softener. 3. Check for Leaks
like ManualsLib or Water Softener Parts UK (some have scanned older manuals).
Do not elevate the overflow hose. It must run downhill continuously to function correctly. Also, never tee the main drain hose and overflow together—they require separate routes to the drain for safety. harvey hv3 water softener installation manual
Before you begin the installation, make sure you have:
Harvey water softener review, types and step by step installation. Close the
For more information on the Harvey HV3 water softener, including detailed specifications and troubleshooting guides, please refer to the manufacturer's website or contact a authorized dealer.
: Place the unit on firm, level ground near the main water entry point, typically after the main stopcock but before any water heater. Check for Leaks like ManualsLib or Water Softener
The unit requires dynamic water pressure to cycle its internal turbines: : 1.7 Bar Maximum Pressure : 6.0 Bar (Daytime) / 8.0 Bar (Static)
Route this hose downward to an outside wall or an area where safe flooding can occur.
The Harvey HV3 measures approximately 490mm (H) x 212mm (W) x 440mm (D). Ensure the cabinet floor is level and strong enough to support the weight of the unit when full of water and salt blocks.
Verify the inlet and outlet connections are correct. Check your blending control setting. If the unit is older, the resin may require replacement.