The following steps should be followed during installation:
Designed to remain fully operational across a ruggedized window of -30°C to +55°C. Range Profiles Ground Wave: ≥is greater than or equal to 30 km using a standard tactical rod/whip antenna. Sky Wave: ≥is greater than or equal to
Press the LITE key if operating in low-light conditions to verify display visibility.
Engage the heavy-duty and torque down the captive socket-head body screws using a standard hex wrench to secure a weather-tight fit. 2. Antenna Selection & Deployment
The is a powerhouse of tactical communications, but its performance is only as good as its technical setup and mechanical installation . From the manpack operator jumping out of a vehicle to the base station dispatcher monitoring a fireground, following the precise frequency, power, and grounding data in this guide ensures maximum range, clarity, and reliability. radio set hx prc 6020 technical data install
thrives on its flexibility within the High Frequency spectrum, allowing operators to leverage ground-wave propagation for local tactical loops and sky-wave/NVIS (Near Vertical Incidence Skywave) configurations for long-range theater communications. Core RF Performance 1.5000 MHz to 29.99999 MHz.
Verify the status of the main power input interface. Check that the contact pins are clean and free of corrosion.
Analog Voice, Digital Voice (Optional), Data, Burst, and CW (Telegraphy) Up to 4800 bit/s over high-speed HF data links Operating Temperature -40°C to +65°C Environmental Standard Certified to MIL-STD-810 E/F and MIL-STD-461/2 (EMC/EMI) Internal Hardware Components
(Man-pack configuration), with options for higher power in vehicular configurations (e.g., VRC-6200). The following steps should be followed during installation:
| Parameter | Specification | |-----------|----------------| | | VHF: 136–174 MHz UHF: 400–470 MHz (or 350–390 MHz for some models) | | Channel Capacity | 256 channels / 16 zones | | Operating Voltage | 7.4 V DC (nominal, Li-ion battery) | | Battery Life | Approx. 12–16 hours (1500–2000 mAh, depending on version) | | RF Output Power | High: 5 W (VHF) / 4 W (UHF) Low: 1 W | | Receiver Sensitivity | 0.25 µV (12 dB SINAD) | | Audio Output | 1 W @ 8 ohms | | IP Rating | IP67 (submersible 1 m for 30 min) | | Dimensions | ~125 × 60 × 38 mm (without antenna) | | Weight | ~320 g (with battery) | | Modulation | FM / 4FSK (digital mode if DMR variant) | | Antenna Connector | SMA-Female (or NATO-standard bayonet depending on clone version) |
Secure the radio tray or mounting base to the vehicle chassis. Ensure it utilizes vibration-dampening shock mounts to protect internal digital logic (e.g., FPGAs) from rough terrain.
Upper Sideband (USB), Lower Sideband (LSB), Amplitude Modulation (AM), and CW Integrated modem supporting speeds up to 4800 bit/s Environmental Standard Full compliance with MIL-STD-810 E/F Operating Temperature Extreme range from -40°C to +65°C Physical Dimensions Maximum size of 360 x 255 x 100 mm (with battery pack) Weight Less than 5.5 kg (including standard battery module) Core Structural Components
Secure the heavy-duty captive socket-head screws and locking plates to firmly latch the battery box to the main body cover. Step 2: Antenna Deployment Engage the heavy-duty and torque down the captive
The following checklist provides a summary of the installation requirements for the Radio Set HX PRC 6020:
When integrating the unit into an expanded mobile vehicle configuration (VRC-6020 variants) or static base camp, link an external remote control unit to the radio. This allows operators to relocate their active position up to several kilometers away from the high-power radiated emissions of the physical antenna array. Critical Operational Safety Protocols
Disclaimer: Technical data and installation procedures are based on the Tadiran HF-6000 series specifications and related documentation. Always refer to the official user manual supplied with your specific equipment.
Continuous coverage from 1.5000 MHz to 29.99999 MHz.
Often used with high-power amplifiers (e.g., GRC-6400 or GRC-6600) to reach power levels up to 1000W for strategic communication. Operational Controls The radio interface includes: Viewer: A screen for visualizing menus and system status.